Monthly Archives: February 2017

Speed Up Your Windows 10

As PC hardware continues to improve in speed, so does software, and Windows 10 is no exception. This is especially true of startup time: If you upgrade from Windows 7 or earlier, you’ll be pleasantly surprised by how fast your machine is ready for action. But there are other performance factors to consider after you’re up and running. We’ve compiled ten tips, many of which are perennial old standbys in the Windows performance game.

The problem with many Windows speedup stories is that they tell you to turn off some of the operating system’s more charming features such as visual animations. Most of the tips here show you ways you can speed up your Windows 10 system without compromising its appearance and functionality. Most are free, but some involve spending a little cash on software or hardware. For those with older, lower-power machines who want a speed boost but don’t care about extra goodies, a couple of the tips towards the end can boost system performance at the expense of some bells and whistles.

If you have your own tips for speeding up Windows 10, please don’t hesitate to post your suggestions in the comment section below.

1. Uninstall Crapware
That extra preinstalled software installed by PC makers continues to be an issue with new computers. I recently was working with a low-cost Lenovo PC that had nearly 20 so-called helper programs installed, and these would occasionally and unwantedly pop up and interrupt what I was doing on the computer.

Here’s how: Tap on the Start button (by default all the way in the lower-left corner of the display), then on All apps at the bottom, and then simply right-click on the offender and choose Uninstall. This will immediately uninstall. You can also right-click on the Windows logo Start button, and choose the top choice Programs and Features. You can also simply type Programs in the Cortana Ask me anything box next to the Start button.

You can usually find the culprits by sorting the list of installed apps on the name of your PC Maker. When you’ve found junk apps you don’t want, simply select them and click Uninstall. Unfortunately, you can only remove one at a time, so set aside a half hour or so for this project. Don’t forget to take the hatchet to apps you installed yourself but no longer want, and for software you don’t want that was installed alongside software you did want.

Keep in mind, with Windows 10 there are two kinds of applications, traditional desktop ones and modern Windows Store apps. To remove the latter, go to the Settings app’s Apps & Features page. There, you’ll see both kinds of apps, while the good ole Control Panel only includes good ole desktop programs. In either you can sort by size, date installed, or name, or search for a particular app.

The reason this helps performance is that many programs load processes at boot time and take up valuable RAM and CPU cycles. While you’re in the Programs and Features section of Control, you can also click Turn Windows Features On or Off and scan the list to see if there’s anything you don’t use. You might also try software like PCDecrapifier and Revo Uninstaller utilities. For more help on what to remove, read How to Clean Crapware From a New PC.

2. Limit Startup Processes
A lot of programs install side processes that run every time you start your PC, and some of them are not things you need running on your system all the time. Compared with Windows 7, in which you had to run the MSCONFIG utility, Windows 10 (and Windows 8.x before it) gives you a new, easier way to limit what runs at startup—from the updated Task Manager.

The easiest way to invoke the Task Manager is by pressing Ctrl-Shift-Esc. Switch to the Startup tab, and you’ll see all the programs that load at Windows startup. The dialog box even has a column that shows you the Startup impact for each. The Status column shows whether the program is enabled to run at startup or not. You can right-click on any entry to change this status. It’s usually fairly easy to see things you don’t want to run. For example, if you never use iTunes, you probably don’t need iTunesHelper to be running all the time.

3. Clean Up Your Disk
From the Start menu, type Disk Cleanup. This opens the trusty Disk Cleanup utility that’s been part of Windows for several generations of the OS. Disk Cleanup finds unwanted junk and files such as temporary files, offline Web pages, and installer files on your PC and offers to delete them all at once. You may even find that your Recycle Bin is bulging at the seams: Mine had 1.47GB I didn’t know was there! This will generally only have a noticeable effect on speed if your drive is getting close to full, however. If you don’t have disk defragmentation scheduled regularly, set that up in the Optimize Drives tool, which you can find by typing its name in the Cortana search box next to the Start button. Another great tool for PC cleanup is Iolo System Mechanic 14, our Editors’ Choice for PC tune-up utilities.

4. Add More RAM
Windows 10 isn’t as much of a hog as earlier versions of the OS, but more memory is always a way to speed up PC operations. For a lot of today’s Windows devices, such as the Surface convertible tablets, however, adding RAM isn’t an option. Gaming and business laptops often still allow RAM upgrades, but that’s becoming rarer by the year. The new, slimmer ultrabooks and convertibles are usually fixed. If you still use a desktop tower, this article can show you how to add RAM. The bigger RAM makers’ (Crucial, Kingston, Corsair) websites all offer product finders that show you which type of RAM your PC takes, and prices are pretty reasonable. I found 8GB high-performance DDR3 RAM for under $40 on Newegg.com.

5. Install an SSD Startup Drive
This past year, I installed a solid-state (SSD) startup drive on my home desktop PC, and the result was a remarkable speedup. And not just for Windows startup, but for loading and using demanding applications such as Adobe Photoshop Lightroom. If you use a laptop, this may also be an option. For system speedup, it makes sense to replace your internal startup hard drive, but an external SSD with a USB 3.0 connection can also give you a speed boost in applications that use a lot of storage. For more info, you can check out PCMag’s article, The Best SSDs and How to Buy an SSD, or look through our recent storage reviews.

6. Check for Viruses and Spyware
You can run the built-in Windows Defender or a third-party app to do this, but you’re best served by PCMag security guru Neil Rubenking’s top pick among malware-cleanup programs, Malwarebytes Anti-Malware—it’s free! But don’t forget to use ongoing anti-malware protection, too. Some of the AV products have a lighter footprint on system performance than others, and the lightest of all, according to Rubenking, is Webroot SecureAnywhere AntiVirus.

7. Change Power Settings to Maximum Performance
Of course, this isn’t a good choice if you want to save electricity, but it could boost your computing. Head to Control Panel / System and Security / Power Options. From here, click on the dropdown arrow on the right side and choose High Performance.

8. Use the Performance Troubleshooter
In Cortana’s search box next to the Start button, type troubleshooting and under System and Security, you’ll see the choice Check for performance issues. Run the troubleshooter and it may find the root cause of your slowdown. For good measure, run through the other troubleshooters, including System Maintenance, Search and Indexing, Hardware and Sounds, and Programs.

9. Change Appearance in Performance Options Dialog
You can easily get to this by typing adjust appearance in Cortana. In the dialog, you can use the radio button at the top labeled Adjust for best performance or select which eye-candy features you can live without from the long list of check boxes below these choices. If you do choose the overall best-performance button, you’ll lose all of the visual effects. For example, you won’t see the contents of a window you’re dragging move, but rather just a rectangle representing the window’s edges. Keeping the effects that you enjoy checked in the dialog is probably a better way to go.

10. Turn off Search Indexing
Especially for lower-powered PCs, search indexing can eat up system resources, if only temporarily. If you do a lot of searching, this won’t appeal to you, as some searches will be slower. To turn off indexing, open the Indexing Options Control Panel window (you can also just type index in the Start button search box, and you should see Indexing Options at the top of the result list), click Modify and remove locations being indexed and file types, too.

If you want to leave search indexing on, but find that it occasionally slows you down, you can stop its process when you need extra speed. Right-click on Computer either in the Start menu or on the desktop, choose Manage. Then double-click Services and Applications, then Services. Find Windows Search, and double click on that. From this Properties dialog, you can choose a Startup type of Manual or Disabled to have the process silent by default. The new Automatic (Delayed Start) startup type according to Microsoft help, “is preferred over the Automatic startup type because it helps reduce the effect on the system’s overall boot performance.” That was the default on my upgraded Windows 10 PC.

Remove Computer Viruses Using a Rescue Disk

Computer viruses are a headache nowadays. Although there are free antivirus programs available for downloads, these are not always efficient in removing stubborn viruses that go deep inside the recesses of the windows operating systems. A computer user is usually faced with the necessity to act outside of the computer system to get rid of the pesky viruses.

Reformat the Hard Drive

Among the best options to get rid of the stubborn viruses is to reformat the hard drive, that is if the computer user can boot up the operating system. This approach can effectively remove all of the possible viruses infecting the computer because all of the data in the hard drive are erased. This is a ‘shotgun approach’ where the computer user is not aiming to clean only certain files in the computer but all of the hard drive. Of course, it will take considerable time to reformat the hard drive. The computer user will need to reinstall once again the operating system and the different applications to be able to use the computer. Also, this prevents the computer user from saving his important files. So what would be the best option when faced with this situation? The best approach is to use a rescue disk.

Rescue Disks

Rescue disks are bootable disks, meaning these disks are capable of running the computer system by itself as a CD software package. Rescue disks take over the management of the windows computer system such as those provided by the windows operating systems like Windows XP, Windows Vista, and recently, Windows 7. The CD software package in rescue disks contain utilities. Utilities are applications that allow the computer user to manage the computer files in such a manner he deems fit such as copying, deleting, or moving files in the computer. If the computer user could not access his files due to the failure of the windows operating system to boot up because of a virus infection, using these utilities will allow him to do so. Utilities also include virus scanners which runs deeply than the conventional antivirus programs. The virus scanners can isolate the virus files which the computer user can opt to erase manually.

Kaspersky Rescue Disk

One of the best bootable rescue disks is the Kaspersky Rescue Disk. The Kaspersky Rescue Disk is based on a Linux kernel thus will operate under a Linux operating system environment. Linux operating systems are virtually immune to windows operating system viruses. The Kaspersky Rescue Disk can be created using the Kaspersky Antivirus program or downloaded from free sites like Softpedia. To create the Kaspersky Rescue Disk, the computer needs to burn the saved iso file using a CD burning tool like Nero. An iso file is unlike the conventional applications file because you cannot run it on a computer while operating under a windows operating system. A computer user needs to reboot the computer before using the Kaspersky Rescue Disk.

Changing the Boot Sequence of the Computer

In order to use the Kaspersky rescue disk or any of your favorite bootable rescue disk created from an antivirus program, this will require changing the boot sequence of the computer. This is by activating the BIOS (basic input/output system) CMOS Setup Utility of the computer. BIOS is the first code run by the computer when powered on. To access it, the computer user needs to reboot the computer system while pressing either the F2 or delete button. Usually, a largely bright blue interface will then appear (see below).

BIOS CMOS

Scroll down using the arrow key until the Advanced BIOS Features (this may vary between computers) is highlighted, hit Enter, and find the First Boot Device menu. Hit Enter and change the first booting device to CD-ROM instead of HDD-0 or the hard drive. Set the hard drive or HDD-0 as the 2nd Boot Device. Hit the Esc key and find the Save and Exit Setup menu, Enter and type Y to confirm the changes that you have made. Allow the computer to reboot with the Kaspersky rescue CD in the CD/DVD drive. Your computer should now reboot using the rescue CD. Watch your screen as you may need to hit any key to reboot using the CD-ROM.

Linux Kernel

The computer will now reboot with the Linux kernel loading, quite unlike the way you boot using a windows operating system. You need to hit Enter to load the Linux kernel of Kaspersky Rescue Disk. Just watch the Linux kernel load line by line (usually white text against a black background). After a few minutes, again a largely blue green background displays where you will get to see a large arrow asking you to scan the computer or update the virus database. If you have downloaded the latest Kaspersky Rescue Disk release, you may proceed directly to scanning. If not, then you have to update the virus database which will take time. If you decide to scan, you may scan any or all your computer’s files like the boot sector, the C or root hard drive or possibly a D virtual hard drive. Select all of the radio buttons and scan the computer by clicking the scan folder. The computer scans and identifies the pesky virus in your computer and will ask you to confirm deletion of the virus file. You may also hit the Fix It Now button after scanning so the computer will automatically remove the difficult to delete viruses. When all these procedures are done, you may reboot your computer using the saved operating system in the hard disk. Just remove the Kaspersky Rescue Disk from the CD/DVD drive so that the computer system will use the hard drive as the second boot device to boot the windows operating system.

The computer virus or viruses should have been removed by the time the windows operating system boots up and displays the screen. If the virus is still there, then you have no option but to reformat the hard drive. Before formatting the hard drive, you can use the Kaspersky Rescue Disk to copy your files to a flash drive using the File Manager utility that goes with the Kaspersky Rescue Disk package.

Some Free Programs to Speed Up Your PC

Have you ever been stuck with a slow computer that made simple things like browsing the Web next to impossible? If yes, then you know how frustrating it is. Fortunately, you can speed up a slow computer without having to spend a single dollar. Here are 5 free programs that will help you speed up your PC.

1. Auslogics Disk Defrag

Disk fragmentation can make your computer really slow, as it scatters file fragments all over the hard drive. That’s why it’s important to defrag your PC at least once a month. Auslogics Disk Defrag is a free defragmenter that has a lot of advanced features even the paid defrag utilities lack. It can defrag files, consolidate free space and move system files to the faster parts of your hard drive, so that your computer works faster in general.

2. CCleaner

Piriform’s CCleaner is a great little computer cleanup package that can cleanup all types of computer junk. It can delete temporary system and Internet files, fix registry errors, help you uninstall software without leaving a single trace, manage your startup items for faster PC boot, and protect your privacy by shredding files and wiping free disk space.

3. Autoruns

Even though CCleaner has a startup management utility, it’s best to get Autoruns to manage your startup list properly. This application will help you analyze our startup configuration and help you optimize it for best performance.

4. Revo Uninstaller

Too often people install software just to try it out and never use it after playing with it for a couple of days. Having too many programs installed on your computer can slow it down by stealing hard drive space. Revo Uninstaller is an advanced utility that can completely remove software without leaving a single trace. This means that everything is removed – even the registry entries.

5. Auslogics Duplicate File Finder

Duplicate File Finder is another handy free program from Auslogics. With its help you will be able to detect unnecessary duplicate copies and free up disk space. The program is very intuitive and can match detected duplicates by content, so that you can be sure you are deleting a true duplicate and not a file with the same name.

These 5 free programs are essential for everyone wanting to keep their computer running fast, stable, and error-free. Remember to cleanup junk on a weekly basis and defrag at least once a month, and your computer will be running as good as new.